| |
[A] Used Gear Testers : Reconditioning & PC Retrofit
(1) Rebuilt and computerized Gear Lead and Profile, Pitch and Roll Testers.
(2) PC-based Retrofit Systems GEAR MASTM for : - |
| |
(i) |
Gear Lead & Profile Testers of various makes and models viz. Klingelnberg, Maag, Goulder Mikron, Carl Mahr, Frenco, Osaka, David Brown, Fellows, Hofler and Chinese etc. |
(ii) |
Gear Pitch and Concentricity Tester. |
(iii) |
Gear Roll Tester. |
(iv) |
DOP / DIP checking machine. |
|
| |
Attachments –
Pitch and PCD Runout and DOP measurement on existing Gear Testers with GearMAS II PC Retrofit System
[B] PC Retrofit for old Roundness Testers – FORM MAS
PC-Retrofit for all makes of Roundness and Form Metrology Instruments of
various makes such as RTH, Mahr Perthen, Hommel, Mitutoyo Federal Kosaka etc.
[D] PC Retrofit for old Contour Measuring Machine: - CONTOUR MASTM -
PC-Retrofit for all makes of Machines such as RTH, Mahr Perthen, Hommel,
Mitutoyo Federal Kosaka etc. |
|
| |
|
| |
| |
|
| |
The following points highlight features of our Rebuilt & Computerised Gear Teasters. |
1. |
Fully reconditioned & all defective mechanical parts reworked or replaced |
2. |
Assured supply of complete spares & services for at least 10 years. |
3. |
Experienced & Skilled Service Team for Service & Calibration. |
4. |
Machine will be proved with CNC machine calibrated master within +/- 2 micron. |
5. |
One year warranty for complete machine . |
6. |
Upgraded more than 300 machines all over India |
7. |
Gear Analysis software is Pentium IV & windows XP OS compatible. |
|
| |
|
| |
| |
|
| |
Pitch & Runout Attachment for Gear Tester of any make: |
| |
Gear MASTM-II is a State of Art PC based Measurement & Analysis System for Inspection of Gear Pitch & PCD Runout .
Features :
1.Automatic Evaluation of Following parameters as per DIN 3960
fp - Pitch deviation
Fp - Cumulative pitch error
Fu - Adjacent Pitch error
Fr – PCD Runout error
2. Automatic detection of DIN Grade of measured job data.
3.User configurable Tolerances
4. Provision of achieve / recall of standard and history data.
5. Generation of multicolor scaled reports in Graphical format. |
| |
|
| |
|
| |
|
| |
|
| |
| |
|
| |
Computerised Gear Roll Tester |
| |
GEAR MASTM-III is a state of Art PC-Based Measurement and Analysis system for Gear Roll Testers of various makes such as Carl Mahr, Goulder Mikron, Osaka, Klingelnberg or any other make.
Features :
1.Evaluation of following parameters as per DIN 3963.
fi" - Double Flank Tooth to Tooth error
Fi" - Double Flank Rotational Deviation (Total Composite error)
Fr - Runout error / Eccentricity error.
Aa - Average center Distance.
2. Automatic detection of DIN Grade of measured job data.
3. Provision of achieve / recall of standard and history data.
4. Generation of multicolor scaled reports in Graphical format.
5. Linear & Polar representation of grap |
| |
|
| |
|
| |
|
